SYSTEM OVERVIEW

The PEPCO DETECTION SYSTEM provides affordable early warning against damage caused by leaking appliances and standing water.   The Water Leak Detector System has the capacity to connect to 1,000's of leak sensors in a large building or campus of buildings or a network of buildings across the street, across town or across the country and communicate the precise location where a leak is occurring.  

The Leak Detection Sensors are installed in any of the following:

1. Under Sinks 
2. Under Toilets 
3. HVAC Units
4. Fan Coil Units, Convectors and PTAC’s 
5. RTU’s 
6. Refrigerator's and Ice Makers
7. Washing Machines and Dishwashers
8. Boilers and Hot Water Heaters
9. A/C Pans and Drain Lines

The Transmitters transmit their signal to a Repeater typically located in a Stairwell or Hallway.  Adding more Repeaters allows us to Stretch the distance we can receive sensors transmissions.  The Repeaters communicate to a RECEIVER installed inside the PEPCO DETECTION Alarm Panel ( “PDAP”).   

Each PDAP is connected to each other using any one of several communication schemes including BACnet IP, BACnet over Ethernet,  BACnet MS/TP or BACnet PTP to form a LAN or WAN network.  

The Sensor DATA are pushed to the cloud where the enteliWEB CLOUD Software relays the Alarm Messaging to the person designated to receive the transmission. 

                         

      ^{Watch our video and see for yourself!}